This module uses CC2530F256 company's TI chip production and become.
One, XL2530-D01 wireless module
1, transmit power 2.5mW (4dBm); receive sensitivity -97dBm (BER=10-2)
2, open the band, without applying frequency, the carrier frequency of 2.4GHz.
3, high anti-interference ability and low bit error rate
4, the air transmission rate up to 250kbps.
5, the sight distance, reliable transmission distance of up to 100 meters (PCB antenna), but also through the module on the IPEX interface external high gain antenna, the distance from the antenna gain decision, gain greatly, distance from the distance.
6, to provide 16 channels, according to the environment automatically choose reliable channel communications.
7, power consumption: receiving current less than 27mA, the emission current is less than 40mA.
8, the volume is small, the weight is light.
9, the use of SoC, less peripheral circuit, high reliability, low failure rate.
10, to provide PCB board antenna, under normal circumstances can not be equipped with antenna. In addition, an external antenna plug is provided.
11, to adapt to the IEEE 802.15.4 2.4GHz protocol and ZigBee application, automatic networking.
12, module size 21.5*26mm
